Beckhoff C9900-U3x0 Manual do Utilizador

C9900-U3x0 Uninterruptible Power Supply (UPS) for industrial PC with 24 VDC supply voltage Version: 1.5 Date: 2011-09-29

Power pack for Beckhoff IPC with UPS Rear view U300 Side view U300 (top-hat rail mounting) C9900-U3x0 7

Power pack for Beckhoff IPC with UPS Connecting the Battery Normally, the battery is mounted in an control cabinet, near to the industrial PC. Th

Power pack for Beckhoff IPC with UPS Maximum length of the feeder cable Maximum cable length The maximum length of the UPS feeder cable must not

Installing the UPS Installing the UPS Two different circuit boards can be used to drive the UPS: the CP-Link card CP9030, or the interface card C12

Installing the UPS Make sure, that the address of the driving CP link card is correct. Click onto the tab UPS to complete the configuration of th

Installing the UPS Configure the interface card C1230S Start the TwinCAT System Manager and click with the right mouse button onto I/O devices.

Installing the UPS System Manager: Tab UPS C1230S After the settings are made, make sure, • to create the relations, • check the configuration

Technical data Technical data The CP-Link board CP9030 and the interface card C1230S, allow a 24 V UPS (uninterruptible power supply) to be control

Technical data Memory allocation in the DPRAM The mentioned address means the offset from the base address of the CP link card (e.g. CP link

Technical data Link label C1230S → UPS C1230S PIN C2000BAT PIN C1230S PIN C2000BAT PIN GND 26 GND 26 UPS-PCL0 9 UPS-activ-passive24 UPS-PLC1

Appendix C9900-U3x0 17 Appendix Beckhoff Support & Service Beckhoff and their partners around the world offer comprehensive support and ser

Table of Contents Table of Contents 1.2.3.4.5.6. Foreword 1 Description of safety symbols 2 The C2000BAT UPS control board 3 Power pack for Bec

Foreword Foreword Notes on the Documentation This description is only intended for the use of trained specialists in control and automation engi

Foreword Description of safety symbols The following safety symbols are used in this operating manual. They are intended to alert the reader to t

The C2000BAT UPS control board The C2000BAT UPS control board Uninterruptible power supply An industry PC with a 24 V power supply can optionally

Power pack for Beckhoff IPC with UPS Power pack for Beckhoff IPC with UPS There are three types for the uninterruptible power system (UPS): • C99

Power pack for Beckhoff IPC with UPS Rear view U310, U320 Side view U310, U320 (top-hat rail mounting) C9900-U3x0 5

Power pack for Beckhoff IPC with UPS C9900-U300 Front view U300 Side view U300 6 C9900-U3x0