Beckhoff CB1061 Manual do Utilizador descarregar pdf (Página 23)

Back Panel Connectors Chapter: Connectors

Beckhoff New Automation Technology CB1061 page 23

3.2 Back Panel Connectors

The board complies with the ATX form factor and thus honours the "I/O Connector Area" as defined in the

ATX specification. A range of standard connectors are available: You can connect PS/2 keyboard and

mouse, displays, speakers, microphone, LAN, USB etc. If the board is mounted in a normal ATX

compliant case, these connectors are located on the back side of the case.

3.2.1 DVI Connectors

The CB1061 has one DVI-I connector and one DVI-D connector combined in one component (Foxconn

QH11121-DADF-4F). With an appropriate adapter, you can connect a CRT display to the DVI-I

connector. Digital DVI or HDMI displays can be attached to both connectors. The CPU's graphics system

supports up to two independent displays.

Pinout DVI-I:

Name

Description

TMDSDAT2#

DVI data 2 -

TMDSDAT2

DVI data 2 +

GND

ground

N/C

reserved

N/C

reserved

DDC CLK

DDC clock (DVI/VGA)

DDC DAT

DDC data (DVI/VGA)

VSYNC

VGA vertical sync

TMDSDAT1#

DVI data 1 -

TMDSDAT1

DVI data 1 +

GND

ground

N/C

reserved

N/C

reserved

VCC

5 volt supply

GND

ground

HP_DETECT

hot plug detect

TMDSDAT0#

DVI data 0 -

TMDSDAT0

DVI data 0 +

GND

ground

N/C

reserved

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 123 124

Comentários a estes Manuais

Sem comentários

Beckhoff CB1061 Manual do Utilizador Página 23

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Beckhoff CB1061