Beckhoff FC520x Manual do Utilizador descarregar pdf (Página 15)

Eiserstraße 5 / D-33415 Verl / Telefon 05246/963-0 / Telefax 05246/963-149

FC520x / CX1500-x520 14

BECKHOFF FC520x / CX1500-x520

3 Fitting and Wiring

3.1 Installation

3.1.1 FC520x

Note:

Fieldbus PCI cards may only be fitted by qualified personnel in accordance and the following points

must be observed

•

In order to protect the card from electrostatic discharge the user must be discharged before han-

dling the card or the PC.

•

Before opening the PC housing it must be switched off, and the mains plug must be removed.

It may be necessary before fitting to set the Dip-Switch in order to activate the internal CAN / DeviceNet

bus terminating resistors. The card can be fitted into any free PCI slot. Ensure that the PCI bus connector

is making good contact, and that the module is seated firmly. Fasten the module to the PC slot housing

with the fixing screw.

DIP-Switch for terminating resistor (120 Ohm) for

each channel

Devic

Net

Channel B

Devic

Net

Channel A

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 50 51

Sem comentários

Beckhoff FC520x Manual do Utilizador Página 15